Genesys News

Latest From Genesys

  • March 07, 2025

    Airbus H125 IFR Cockpit Certified

    Moog expands available solutions for single-pilot IFR operations on single-engine rotorcraft Mineral Wells, TX (March 7, 2025) – Moog announced that it has successfully received FAA Supplemental Type Certificate (STC) approval of its Genesys cockpit avionics suite for single pilot Instrument Flight Rules (IFR) operations on the Airbus H125 helicopter.  The STC project was completed […]

    READ MORE

  • October 21, 2024

    Moog Celebrates 100th Delivery of TH-73A Trainer Helicopter Avionics Suite

    Genesys Avionics Suite-equipped U.S. Navy trainer fleet excels in modernized flight training Mineral Wells, TX (October 21, 2024) – Genesys Aerosystems, a Moog company, announced a significant milestone with the 100th delivery of its Genesys Avionics Suite™ for the Leonardo TH-73A Thrasher. The TH-73A Thrasher helicopter is utilized by the U.S. Navy for its rotary-wing/tilt-rotor […]

    READ MORE

  • October 01, 2024

    Moog Announces Genesys’ Glass Cockpit Certification on Pilatus PC-7

    Upgrade Solution for PC-7 and Beechcraft T-6A Aircraft Mineral Wells, TX (Oct 1, 2024) – Genesys Aerosystems, a Moog company, announced today that Genesys Aerosystems’ Approved Model List (AML) Supplemental Type Certificate (STC) for its EFIS glass cockpit upgrade has been completed and issued by the FAA. The first aircraft equipped with the Genesys Avionics […]

    READ MORE

  • September 12, 2024

    Moog Announces Milestone for Leonardo AW109SP “Da Vinci” Helicopter

    Rega’s AW109SP with Genesys cockpit avionics achieves first helicopter RNP AR 0.3 approval Mineral Wells, TX (Sept 11, 2024) – Genesys Aerosystems, a Moog company, announced today the Leonardo AW109SP “Da Vinci” helicopter, equipped with the Genesys EFIS suite, has achieved the world’s first helicopter RNP AR 0.3 approach and departure procedure approval. This historic […]

    READ MORE

  • September 05, 2024

    Moog Announces Genesys Cockpit Featured In Grob TP-X Cobra Trainer

    Mineral Wells, TX (Sept 05, 2024) – Genesys Aerosystems, a Moog company, announced today that its Genesys Avionics Suite™ is featured in the newly announced Grob Aircraft France (GAF) Cobra trainer aircraft. After five years of development in complete secrecy, GAF has unveiled a new aircraft model featuring a full Genesys Aerosystems glass cockpit as […]

    READ MORE

  • July 17, 2024

    Moog’s S-TEC® Autopilot Certifies on Metroliner Aircraft

    S-TEC 3100 Autopilot Approved for Fairchild Swearingen Metroliner

    READ MORE

  • June 29, 2023

    Genesys Aerosystems Flight Tests NextGen Autopilot

    GRC™-4000 Autopilot Development Progresses Toward STC Mineral Wells, TX (June 29, 2023) – Genesys Aerosystems, a Moog Inc. company, announced today that its development of the Genesys IFR Helicopter Autopilot (GRC™-4000) has started company flight testing with the goal of completing STC by end of 2023. Genesys Aerosystems submitted an STC Application on April 4th, […]

    READ MORE

February 07, 2023

Genesys Glass Cockpit Takes Flight for Pilatus PC-7, Beechcraft T-6A STC, and Others

Mineral Wells, TX (February 07, 2023) – Genesys Aerosystems, a Moog Inc. company, announced today that Genesys Aerosystems’ Approved Model List (AML) Supplemental Type Certificate application has been accepted by the FAA. The first aircraft equipped with the Genesys avionics suite and flown in support of the STC is a Pilatus PC-7 operated by Genesys. […]

READ MORE

October 19, 2022

Genesys Aerosystems Receives Pilatus PC-7 Trainer Aircraft FAA AML STC Project Approval

Mineral Wells, TX (October 13, 2022) – Genesys Aerosystems, a Moog Inc. company, announced today that it has been assigned an FAA project number for an Approved Model List (AML) Supplemental Type Certificate (STC) on a Pilatus PC-7 aircraft. When completed, the AML STC will allow for addition of the Beech Model 3000 aircraft. Additionally, […]

READ MORE
CN-235 Aircraft

September 28, 2022

Genesys Aerosystems Completes Certification of Genesys Avionics Suite on CN-235 Aircraft

Mineral Wells, TX (Sept. 28, 2022) – Genesys Aerosystems, a Moog Inc. company, announced today that it has received full civil certification and acceptance by the military end customer for the complete Genesys Avionics Suite installed in the Indonesian Aerospace (PTDI) CN-235 aircraft. The Genesys avionics consists of EFIS flight displays with embedded FMS and […]

READ MORE

September 12, 2022

Genesys Aerosystems Receives EASA Certification Approval for HeliSAS Autopilot for Bell 505 Helicopter

Mineral Wells, TX (Sept 12, 2022) – Genesys Aerosystems, a Moog Inc. company, announced today that it has received full EASA certification approval for the HeliSAS® Autopilot and Stability Augmentation System on the Bell 505 platform. The EASA approval covers both 2-axis and 3-axis configurations. The new certification approval is in addition to the existing […]

READ MORE
Genesys IDU-450 EFIS Display

August 22, 2022

FAA Approves Cockpit Upgrade for Capstone Operators

FAA NextGen Capstone Program Aircraft Upgrade STC Approval Mineral Wells, TX (August 22, 2022) – Genesys Aerosystems, a Moog Inc. company, announced today its EFIS IDU-450 product line has received FAA STC approval for installation into smaller Part 23 aircraft including Alaska Capstone flyers. Since 2010, Genesys Aerosystems has enabled Alaskan aircraft operators to take […]

READ MORE
S-TEC 4000R Autopilot

May 05, 2022

Genesys Aerosystems Completes Autopilot Flight Test on HAL Avro

First Successful Indian Part 25 Autopilot Integration in Recent History Mineral Wells, TX (May 05, 2022) – Genesys Aerosystems, a Moog Inc. company, announced that it has completed flight testing of its S-TEC 5000R Autopilot on the Hindustan Aeronautics Ltd. (HAL) Avro HS-748 aircraft.     This successful Part 25 aircraft autopilot integration represents another milestone […]

READ MORE