Genesys News

Latest From Genesys

  • October 01, 2024

    Moog Announces Genesys’ Glass Cockpit Certification on Pilatus PC-7

    Upgrade Solution for PC-7 and Beechcraft T-6A Aircraft Mineral Wells, TX (Oct 1, 2024) – Genesys Aerosystems, a Moog company, announced today that Genesys Aerosystems’ Approved Model List (AML) Supplemental Type Certificate (STC) for its EFIS glass cockpit upgrade has been completed and issued by the FAA. The first aircraft equipped with the Genesys Avionics […]

    READ MORE

  • September 12, 2024

    Moog Announces Milestone for Leonardo AW109SP “Da Vinci” Helicopter

    Rega’s AW109SP with Genesys cockpit avionics achieves first helicopter RNP AR 0.3 approval Mineral Wells, TX (Sept 11, 2024) – Genesys Aerosystems, a Moog company, announced today the Leonardo AW109SP “Da Vinci” helicopter, equipped with the Genesys EFIS suite, has achieved the world’s first helicopter RNP AR 0.3 approach and departure procedure approval. This historic […]

    READ MORE

  • September 05, 2024

    Moog Announces Genesys Cockpit Featured In Grob TP-X Cobra Trainer

    Mineral Wells, TX (Sept 05, 2024) – Genesys Aerosystems, a Moog company, announced today that its Genesys Avionics Suite™ is featured in the newly announced Grob Aircraft France (GAF) Cobra trainer aircraft. After five years of development in complete secrecy, GAF has unveiled a new aircraft model featuring a full Genesys Aerosystems glass cockpit as […]

    READ MORE

  • July 17, 2024

    Moog’s S-TEC® Autopilot Certifies on Metroliner Aircraft

    S-TEC 3100 Autopilot Approved for Fairchild Swearingen Metroliner

    READ MORE

  • June 29, 2023

    Genesys Aerosystems Flight Tests NextGen Autopilot

    GRC™-4000 Autopilot Development Progresses Toward STC Mineral Wells, TX (June 29, 2023) – Genesys Aerosystems, a Moog Inc. company, announced today that its development of the Genesys IFR Helicopter Autopilot (GRC™-4000) has started company flight testing with the goal of completing STC by end of 2023. Genesys Aerosystems submitted an STC Application on April 4th, […]

    READ MORE
Helicopters Italia Exterior

April 11, 2016

Helicopters Italia Installs HeliSAS® System

Mineral Wells, TX — Helicopters Italia has successfully completed its first installation of the HeliSAS® Autopilot and Stability Augmentation System on an AS350 B3 helicopter. The customer — Cav. Luca Marianetti, CEO and President of Velan ABV S.p.A — has expressed his satisfaction with the improved helicopter performance.         The retrofit was successful due […]

READ MORE

January 15, 2016

Digital, Attitude-Based Autopilot for Cessna 414 and 421

MINERAL WELLS, TX – The Twin Cessna Flyer (January 2016) reports on the Genesys Aerosystems IntelliFlight 2100, an ideal 3-axis digital autopilot and flight management system for owners of Cessa 414 and 421 aircraft. Editor Bob Thomason writes: "I lust for an attitude-based autopilot and now 414 and 421 owners have a good option. Recently a new one became available […]

READ MORE

August 17, 2015

Genesys Earns EASA Certification for STC on HeliSAS and Autopilot on EC1302 T2

MINERAL WELLS, TX – Genesys Aerosystems announced that its HeliSAS Helicopter Stability Augmentation System and Autopilot has received European Aviation Safety Agency (EASA) approval for installation of its Supplemental Type Certificate (STC) on Eurocopter EC130 T2 helicopters. The company earned FAA certification for the STC in September 2014. The STC is the result of the […]

READ MORE

July 20, 2015

Genesys Applies For STC To Install Its DFCS 2100 Autopilot on Cessna 414 And 421-Series Aircraft

MINERAL WELLS, TX – Genesys Aerosystems announced that it has applied for a Supplemental Type Certificate (STC) to install its IntelliFlight 2100 Autopilot Digital Flight Control System (DFCS) on the Cessna 414 and 414A as well as the Cessna 421, 421A, 421B, and 421C aircraft. Benefits of the IntelliFlight 2100 digital autopilot and flight management […]

READ MORE

July 08, 2015

Genesys Aerosystems Is In The Process Of Earning An FAA STC For Its HeliSAS® Autopilot and Stability Augmentation System On Robinson R66 Turbine Helicopters

All digital HeliSAS will deliver significant advancements in reducing workload and improve operational safety for single-pilot helicopter operations. Mineral Wells, TX – Genesys Aerosystems announced today that the company has initiated a program to earn an FAA Supplemental Type Certificate (STC) for the retrofit installation of its HeliSAS® Autopilot and Stability Augmentation System on Robinson […]

READ MORE

July 06, 2015

U.S. Army Training Aircraft to Feature Genesys Aerosystems Glass Cockpit

MINERAL WELLS, TX – The U.S. Army’s next generation fixed-wing training aircraft will be equipped with Genesys Aerosystems’ glass cockpit.  The all-digital cockpit was developed by Genesys Aerosystems for the Grob G 120TP to support advanced military training concepts.  The Army will train 600 students per year in six Grob trainers. The avionics include synthetic […]

READ MORE