Genesys News

Latest From Genesys

  • T-6A Texan II Trainer Aircraft

    July 28, 2025

    Moog’s Genesys Avionics Suite Selected for T-6A Avionics Program

    Moog and Borsight Partner to Modernize U.S. Air Force Training Fleet   Mineral Wells, TX – Moog Inc. (NYSE: MOG.A and MOG.B), a worldwide designer, manufacturer, and systems integrator of high-performance precision motion and fluid controls and control systems, announced today that its Genesys Avionics Suite™ has been selected for the U.S. Air Force T-6A […]

    READ MORE

  • May 12, 2025

    Moog Signs Lynden Air Cargo Hercules Fleet Upgrade Agreement

    Contract Modernizes Fleet with Genesys Avionics Suite™   Mineral Wells, TX – Moog Inc. (MOG.A and MOG.B) announced that it has signed an agreement with Lynden Air Cargo to modernize its Lockheed Martin Model 382G Hercules fleet (L-382G) with the Genesys Avionics Suite™ to extend the operational life and improve mission effectiveness. The modernization effort […]

    READ MORE

  • March 07, 2025

    Airbus H125 IFR Cockpit Certified

    Moog expands available solutions for single-pilot IFR operations on single-engine rotorcraft Mineral Wells, TX (March 7, 2025) – Moog announced that it has successfully received FAA Supplemental Type Certificate (STC) approval of its Genesys cockpit avionics suite for single pilot Instrument Flight Rules (IFR) operations on the Airbus H125 helicopter.  The STC project was completed […]

    READ MORE

  • October 21, 2024

    Moog Celebrates 100th Delivery of TH-73A Trainer Helicopter Avionics Suite

    Genesys Avionics Suite-equipped U.S. Navy trainer fleet excels in modernized flight training Mineral Wells, TX (October 21, 2024) – Genesys Aerosystems, a Moog company, announced a significant milestone with the 100th delivery of its Genesys Avionics Suite™ for the Leonardo TH-73A Thrasher. The TH-73A Thrasher helicopter is utilized by the U.S. Navy for its rotary-wing/tilt-rotor […]

    READ MORE

  • October 01, 2024

    Moog Announces Genesys’ Glass Cockpit Certification on Pilatus PC-7

    Upgrade Solution for PC-7 and Beechcraft T-6A Aircraft Mineral Wells, TX (Oct 1, 2024) – Genesys Aerosystems, a Moog company, announced today that Genesys Aerosystems’ Approved Model List (AML) Supplemental Type Certificate (STC) for its EFIS glass cockpit upgrade has been completed and issued by the FAA. The first aircraft equipped with the Genesys Avionics […]

    READ MORE

  • September 12, 2024

    Moog Announces Milestone for Leonardo AW109SP “Da Vinci” Helicopter

    Rega’s AW109SP with Genesys cockpit avionics achieves first helicopter RNP AR 0.3 approval Mineral Wells, TX (Sept 11, 2024) – Genesys Aerosystems, a Moog company, announced today the Leonardo AW109SP “Da Vinci” helicopter, equipped with the Genesys EFIS suite, has achieved the world’s first helicopter RNP AR 0.3 approach and departure procedure approval. This historic […]

    READ MORE

  • September 05, 2024

    Moog Announces Genesys Cockpit Featured In Grob TP-X Cobra Trainer

    Mineral Wells, TX (Sept 05, 2024) – Genesys Aerosystems, a Moog company, announced today that its Genesys Avionics Suite™ is featured in the newly announced Grob Aircraft France (GAF) Cobra trainer aircraft. After five years of development in complete secrecy, GAF has unveiled a new aircraft model featuring a full Genesys Aerosystems glass cockpit as […]

    READ MORE

  • July 17, 2024

    Moog’s S-TEC® Autopilot Certifies on Metroliner Aircraft

    S-TEC 3100 Autopilot Approved for Fairchild Swearingen Metroliner

    READ MORE

August 05, 2019

Genesys Aerosystems Equipped Leonardo TH-119 Achieves IFR Certification

Leonardo TH-119 helicopter becomes IFR capable with the latest Genesys avionics suite utilizing IDU-680 displays Mineral Wells, TX (August 6, 2019) – Genesys Aerosystems announced today that it has recently received Supplemental Type Certification (STC) for its avionics suite utilizing the IDU-680 and supporting sensors in the Leonardo TH-119. This STC also certifies the TH-119 for […]

READ MORE

July 30, 2019

Genesys Aerosystems EFIS Qualified to Military Standards

Certification opens new opportunities for Genesys displays and sensors Mineral Wells, TX (July 31, 2019) – Genesys Aerosystems has announced its popular EFIS (Electronic Flight Instrument System) has successfully completed military standard qualification. The system, including the IDU-680 smart displays, ADAHRS (Air Data, Attitude, and Heading Reference System), and GPS receiver, demonstrated it meets the […]

READ MORE

March 19, 2019

Genesys Aerosystems to certify popular HeliSAS Stability Augmentation System on Bell 505 Jet Ranger X helicopter

The safety enhancing HeliSAS coming to the Bell 505 Mineral Wells, TX (March 19, 2019) – Genesys Aerosystems announced today that it has begun the Supplemental Type Certification (STC) process for its VFR version of the Helicopter Stability Augmentation System (HeliSAS) autopilot for the Bell 505 Jet Ranger X. “Genesys Aerosystems has already worked with the […]

READ MORE

March 04, 2019

Genesys Aerosystems IFR HeliSAS Autopilot Integration on UH-60 Black Hawk By XP Services and Sierra Nevada Corporation

Genesys HeliSAS Increases Safety and Decreases Pilot Workload Mineral Wells, TX (March 5, 2019) –– Genesys Aerosystems announced that it has teamed up with XP Services with support from the Sierra Nevada Corporation (SNC) in the integration of the IFR HeliSAS Autopilot and Stability Augmentation System as part of the comprehensive UH-60 Black Hawk upgrade […]

READ MORE
Airbus EC-145e With IDU-450 & IFR HeliSAS photo courtesy of Metro Aviation

February 18, 2019

Genesys Aerosystems earns STC for modernized avionics suite on Airbus EC-145e

*Photo courtesy of Metro Aviation Airbus EC-145e becomes IFR capable with the latest Genesys avionics suite utilizing IDU-450 displays Mineral Wells, TX (February 18, 2019) –– Genesys Aerosystems announced today that it has received Supplemental Type Certification (STC) for its avionics suite utilizing the IDU-450 featuring 8.0H software on the Airbus Helicopters EC-145e. The IDU-450 […]

READ MORE

February 18, 2019

Genesys Aerosystems earns certification for a new IFR-certified HeliSAS Stability Augmentation System

Two-axis IFR HeliSAS autopilot is designed for dual-pilot operations, while a three-axis IFR HeliSAS is certified for single-pilot operations Mineral Wells, TX (February 18, 2019) – Genesys Aerosystems announced today that the company has earned certification (STC and TSO) for an IFR-certified Helicopter Stability Augmentation System (HeliSAS) targeted for legacy Part 29 twin-engine helicopters. The new HeliSAS […]

READ MORE